淡江大學機構典藏:Item 987654321/118013
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62819/95882 (66%)
造访人次 : 4003798      在线人数 : 711
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/118013


    题名: Study on the Viscoelasticity Properties of the Glass Mat Thermoplastics (GMT) in Compression Molding System.
    作者: Huang, Chao-Tsai (CT);Chen, Ling-Jue;Chien, Tse-Yu;Sun, Shih-Po;Wang, Chih-Wei;Hsu, Chih-Chung;Hsu, David;Chang, Rong-Yeu
    关键词: Viscoelasticity;Glass Mat Thermoplastics (GMT);Compression Molding;fiber-resin matrix separation
    日期: 2019-03-18
    上传时间: 2020-01-10 12:10:12 (UTC+8)
    出版者: Society of Plastics Engineers
    摘要: Compression molding is one of the lightweight technologies able to provide efficient way to retain fiber length for better mechanical property comparing to injection molding. In compression molding development, materials such as glass fiber mat thermoplastics (GMT) are often applied. However, due to the complicated micro-structure of the reinforced material, and the interaction of fiber-resin matrix, it is still challenge to have uniform compressed GMT product. In this study, we have developed a method to measure the rheological properties of GMT material through a compression system. Specifically, we have utilized compression molding system to estimate the rheological parameters of GMT. Those rheological parameters are then integrated into CAE (Moldex3D) to evaluate the flow behavior under the compression operation. Results showed that the trend of the loading force is increased exponentially against displacement at various compression speeds. However, some significant differences between simulation and experiment are observed. Specifically, at the early compression stage, the volume of long fiber-resin matrix is expanded by 50% in real experiment. This causes the loading force difference at the beginning between simulation and experiment. On the other hand, at the middle to the end stage, due to the fiber-resin matrix separation, the more the resin left the matrix, the higher the resistance generated. This results in the jump up of the loading force in the real experiments comparing to the simulation prediction. This deviation can be validated through the measurement of fiber content through TGA.
    關聯: SPE Technical Papers 35, p.1-5
    显示于类别:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的档案:

    没有与此文件相关的档案.

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈