CAE for Advanced Injection Molding Technologies

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 專書之單篇 > Item 987654321/117218

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/117218

题名:	CAE for Advanced Injection Molding Technologies
作者:	Chang, Rong-Yeu;Huang, Chao-Tsai (CT)
关键词:	CAE, injection molding;Multi-component molding;Lightweight technologies;conformal cooling
日期:	2019-05-06
上传时间:	2019-10-03 12:11:55 (UTC+8)
出版者:	Hanser
摘要:	Injection molding is one of the most popular polymer processing methods and has been used to mass produce plastics products for many decades. However, due to increasingly stringent requirements and higher customer expectations, conventional injection molding cannot always meet all manufacturing specifications. Hence, many advanced injection molding technologies have been developed to accommodate the higher standards and special features. Those technologies include the following: • Multi-component molding techniques such as over-molding, insert molding, co-injection molding, and bi-injection molding. • Lightweight technologies such as injection molding using fiber-reinforced plastic (FRP), microcellular injection molding, gas-assisted injection molding, and water-assisted injection molding. • Advanced heating and cooling management techniques including advanced hot runner systems, conformal cooling, and variotherm technologies. • Special molding technologies such as injection–compression molding, compression molding, and so on.
關聯:	Advanced Injection Molding Technologies
DOI:	10.3139/9781569906040
显示于类别:	[化學工程與材料工程學系暨研究所] 專書之單篇

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	383	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章