English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 55566/89886 (62%)
造访人次 : 11024221      在线人数 : 43
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻

    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/116950

    题名: Porothermoelastic response and damage potential of tripping unconventional cores from six different shale plays
    作者: Taghichian, Ali;Hashemolhosseini, Hamid;Musharraf Zaman, F.ASCE;Yang, Zon-Yee
    关键词: Unconventional reservoirs;Core retrieval;Core damage;Poroelasticity;Porothermoelastic response;Characteristic time;Tripping velocity
    日期: 2018-10-24
    上传时间: 2019-09-10 12:11:40 (UTC+8)
    摘要: Coring operations in the petroleum industry are generally performed to study geological, petrophysical, geomechanical, and drilling properties of reservoir formations and characteristics of reservoir fluids. Some of these studies need intact cores for performing mechanical tests or for measuring reservoir fluid properties. Therefore, retrieval of intact cores is crucial to coring jobs. During the coring operation and tripping a core out of a well, it experiences a sudden or gradual decrease in confining stress, pore pressure, and temperature (time-dependent boundary conditions) depending on the mud pressure, in situ stress, reservoir temperature, and reservoir pore pressure. Some porothermoelastic (PTE) properties of the retrieved core also change due to the change in reservoir conditions at or near the surface. Specifically, changes in the core properties depend on the in situ conditions, mud pressure, and the tripping velocity. These conditions or phenomena, which occur simultaneously, induce mechanical, poroelastic (PE), and thermal stresses in the core, which may cause failure. In this paper, the PTE behavior of unconventional tripping of cores is studied with the goal of identifying the most influential variables and the risk of core damage. First, the PTE and in situ properties of six different shale plays located in the US are collected from the literature. The Marcellus shale data are then used to identify the following three most important controlling factors and their effect on the core damage: use of PE and/or PTE approaches, use of constant or variable properties, and change in tripping velocity. Second, the gradual change in stress, pore pressure, and temperature during core tripping is examined in the Marcellus shale. Third, PTE behavior and damage potential of the selected six shale plays during tripping are investigated, and the results among these reservoirs are compared. Fourth, a comprehensive sensitivity analysis is performed for each of these shale plays via changing the input variables by selected percentages and observing the change in the effective stress field. Finally, some guidelines are presented, along with an optimization procedure for tripping velocity, for efficient coring operations. A commonly used software, FLAC3D, is used for all numerical analyses because of its capability and features of simulating coupled problems as a PTE medium with variable properties and time-dependent boundary conditions.
    關聯: ASCE International Journal of Geomechanics 19(1), p.04018185(1-18)
    DOI: 10.1061/(ASCE)GM.1943-5622.0001328
    显示于类别:[土木工程學系暨研究所] 期刊論文


    档案 描述 大小格式浏览次数
    Porothermoelastic Response and Damage Potential of Tripping Unconventional Cores from Six Different Shale Plays.pdf4382KbAdobe PDF0检视/开启



    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈