淡江大學機構典藏:Item 987654321/116050
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 62797/95867 (66%)
Visitors : 3728978      Online Users : 559
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/116050


    Title: Structural design of a rotating disk dynamic microfilter in improving filtration performance for fine particle removal
    Authors: Su-En Wu;Kuo-Jen Hwang;Tung-Wen Cheng;Kuo-Lun Tung;Eiji Iritani;Nobuyuki Katagiri
    Keywords: Rotating disk filter;Dynamic microfiltration;Shear-enhanced filtrationCake properties;Seawater pretreatment;Computational fluid dynamics
    Date: 2019
    Issue Date: 2019-03-23 12:10:54 (UTC+8)
    Publisher: Elsevier
    Abstract: This study investigated the selection of optimal operating conditions and the design of efficient rotating disk structures for removing particles from seawater. The distributions of fluid velocity and shear stress on the membrane surface under various operating conditions were simulated using computational fluid dynamics. Type 1 rotating disk had two vans, Type 2 rotating disk had four vanes shaped identically to those of the Type 1 rotating disk, and Type 3 rotating disk had two vanes with circular orifices located at the center of each vane. The simulated results indicated that the disk rotation speed is the main factor affecting shear stress on the membrane surface. Cake mass and filtration flux were estimated from shear stress and were calculated using empirical equations. The results showed that flux in Type 1 increased by 28% when the disk rotation speed increased from 1000 to 3000 rpm; the installation of extra vanes caused an ineffective increase in flux at 3000 rpm. Although Type 2 exhibited the highest filtration performance and the lowest cake resistance, Type 3 is the optimal design because it exhibited the highest specific filtration flux among all tested rotating disk types. The rotating disk with two vanes with a circular orifice at a low disk rotation speed demonstrated the optimal design and operating conditions for removing particles from seawater, because it resulted in high filtration fluxes and relatively low power consumption.
    Relation: Journal of the Taiwan Institute of Chemical Engineers v.94, p.43-52.
    DOI: 10.1016/j.jtice.2018.04.032
    Appears in Collections:[Graduate Institute & Department of Chemical and Materials Engineering] Journal Article

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML177View/Open
    Structural design of a rotating disk dynamic microfilter in improving filtration performance for fine particle removal..pdf3910KbAdobe PDF2View/Open

    All items in 機構典藏 are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - Feedback