Study on the Real Performance of the Existed Machine in Injection Moulding to Face Automation Challenge

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 會議論文 > Item 987654321/115851

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/115851

题名:	Study on the Real Performance of the Existed Machine in Injection Moulding to Face Automation Challenge
作者:	Huang, Chao-Tsai;Hsu, Yi-Hsuan;Lin, Gwo-Geng;Jong, Wen-Ren;Chang, Rong-Yeu
关键词:	injection molding;warpage;automation
日期:	2018-09-19
上传时间:	2019-02-27 12:10:33 (UTC+8)
摘要:	In recent years, many automation technologies and equipment are applied for new injection molding systems to execute automation for Industry 4.0. However, there are a lot of the existed injection machines or systems which are not ready for automation yet. Before automatic manufacturing, how to retain good quality is one of the crucial factors in injection molding. In this study, we have focused on how to discover the performance problem of some existed injection machine to face the automation challenge using CAE technology. In the real testing case, we have demonstrated that CAE simulation prediction can be regarded as the ideal target for manufacturing. Furthermore, it is also estimated the difference between simulation prediction and real exper-imental result quantitatively. However, after careful comparison on the amount of the driving force to gen-erate deviation from the target, the real experimental result presents almost the same trend and the same amount as numerical predicted. Moreover, we also tried to compensate the under-performance problem of the real experiment using a series of packing pressure settings suggested by numerical simulation. Results showed that quality can be improved significantly.
關聯:	PMI2018 Conference Proceedings
显示于类别:	[化學工程與材料工程學系暨研究所] 會議論文

文件中的档案:

档案	大小	格式	浏览次数
index.html	0Kb	HTML	246	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....