数据加载中.....
|
jsp.display-item.identifier=請使用永久網址來引用或連結此文件:
https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/115089
|
| 题名: | Study on the Influences on Fiber Micro-structure Variations and the Connection to Final Shrinkage/Warpage on Long Fiber Reinforced Thermoplastics (FRT) Parts |
| 作者: | Huang, Chao-Tsai (CT);Hsu, Chia;Yeh, Cherng-En;Chen, Yi-Sheng;Hwang, Sheng-Jye;Peng3, Hsin-Shu;Wu, Chih-Che;Tu, Chun-I |
| 关键词: | fiber-reinforced thermoplastics (FRT);injection molding;shrinkage;warpage |
| 日期: | 2018-05-23 |
| 上传时间: | 2018-10-04 12:11:31 (UTC+8) |
| 摘要: | Because of its great potential and capability, the fiber-reinforced thermoplastics (FRT) material and technology have been widely utilized into industry recently. However, due to the microstructures of fiber inside plastic matrix are very complex, they are not easy to be visualized. The connection from microstructures to the final shrinkage/warpage is still not fully understood yet. In this study, we have performed a benchmark with three standard specimens based on ISO 527 where those specimens have different gate designs. Due to the geometrical effect, the warpage behaviors are quite different for those three specimens. Specifically, it pushes one specimen warped downward and bended inward, another warped upward, and the other slightly upward at the same time. The difference might be due to the interaction of the entrance effect of molten plastic with fiber content to cause high asymmetrical fiber orientation distribution (FOD). Moreover, the experimental study is also performed to validate the simulation results. From short shot testing to the warpage and bending measurement for each individual model, overall, the tendency for both numerical simulation and experimental results is in a reasonable agreement. However, to get better understand between the microstructures of the fibers and the final shrinkage/warpage, it still needs for further more study |
| 關聯: | PPS-34 Proceeding |
| 显示于类别: | [化學工程與材料工程學系暨研究所] 會議論文
|
在機構典藏中所有的数据项都受到原著作权保护.
|
