淡江大學機構典藏:Item 987654321/114733
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62805/95882 (66%)
造访人次 : 3944814      在线人数 : 614
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/114733


    题名: 三維偏振散射光量測系統之設計與實現
    其它题名: Design and implementation of three-dimensional polarized light-scattering measurement system
    作者: 張力仁;Chang, Li-Jen
    贡献者: 淡江大學機械與機電工程學系博士班
    劉承揚;Liu, Cheng-Yang
    关键词: laser;polarized light-scattering;surface roughness;thread;wood surface;木材表面;表面粗糙度;偏振散射光;雷射;螺紋
    日期: 2017
    上传时间: 2018-08-03 15:02:14 (UTC+8)
    摘要: 　　本研究建立一套完整的偏振散射光量測系統，可對待測物進行二維和三維的散射光量測，此系統可分為三大部分:光源組件、旋轉控制機構與偵測組件，其中光源組件採用之雷射波長為405 nm, 515 nm, 671 nm搭配光圈、濾波鏡、λ /2 波板、偏振鏡、空間濾波器、擴束器進行偏振光源控制，旋轉控制機構運用四個旋轉步進馬達來控制入射光與接收端的角度，偵測組件為電荷偶合元件搭配35 mm物鏡與偏振鏡，藉由轉動偏振鏡來偵測不同偏振角度的散射光成像。為了驗證本系統的可行性，本研究選用三種待測物，分別為表面粗糙度標準片、木材和公制螺紋，其中表面粗糙度值為Ra = 1.6 μm、Ra = 0.8 μm、Ra = 0.4 μm、Ra = 0.1 μm，木材為南方松、杉木、白楊木，螺紋為公制M3和M6。經由實驗結果可知，三維偏振散射光可用來區分待測物的特徵和材質，對於未來自動光學檢測系統的發展有相當大的助益。
    In this study, polarization scattering light measurement system is established. The characterization of surface measurement is investigated by using in-plane and out-of-plane polarized light-scattering measurements. This system is divided into the light source assembly, rotation control mechanism and detection component. The laser wavelengths of measurtment system are 405 nm, 515 nm and 671 nm. In order to adjust the polarized light sources, the light beam goes through the pinhole, waveplane, polarizer, space filter, and beam expander. The rotation control mechanism applies four stepper motors to control the incident angle and detection angle. The detection component is a charge couple device (CCD) camera. The polarizer and 35 mm focusing lens are set up in front of the CCD. The angle of polarizer is rotated to control the direction of polarization of the scattered light. This experiment conducts the measurements by using standard sheets of metal surface roughness, woods and ISO metric screws. The roughnesses are Ra = 1.6 μm , Ra = 0.8 μm , Ra = 0.4 μm and Ra = 0.1 μm , respectively. The woods are pine, spruce and aspen. The metric screws are ISO M6 and ISO M3. This measurement system can be used to quickly and accurately distinguish between different surfaces and properties. In the future, there is a considerable benefit at the development of automatic optical detection system.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML301检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈