淡江大學機構典藏:Item 987654321/113735
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 56828/90533 (63%)
造訪人次 : 12258974      線上人數 : 71
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/113735


    題名: On the Design of Integrated Electric Motors with Gear Mechanisms
    整合電動馬達與齒輪減速機之設計
    作者: 陳冠辰
    貢獻者: 淡江大學機電系
    關鍵詞: Electric motor;Gear train, Integrated design;Creative mechanism design
    電動馬達;齒輪減速機;整合設計;創意性機構設計
    日期: 2017-10
    上傳時間: 2018-06-22 14:13:31 (UTC+8)
    出版者: 成功大學
    摘要: This work presents a novel design procedure for integrating electric motors
    with gear mechanisms. Based on the configurations of electric motors and the
    kinematic structure of gear trains, the design requirements and constraints are
    concluded. By applying the graph representations and creative mechanism
    design methodology, feasible design concepts are successfully generated
    systematically. The open-circuit magnetostatic field analysis of a DC
    commutator motor conducted by applying 1-D and 2-D equivalent magnetic
    circuit methods are obtained and verified using FEA. The differences in the
    air-gap flux density are 3.21% and 3.06% for 1-D and 2-D methods, respectively.
    The Carter’s coefficient is applied to model the permeance of the slot and
    gear-teeth space. The affection of the integrated gear-teeth on the flux linkage
    and the first derivative of the flux linkage can be ignored. The design methods
    for gear trains, gear profiles, number of gear teeth, and gear strength are also
    introduced. The maximum stress of the gear profile is 312 MPa, and the results
    show that the gear train can be used for transmission purposes. A DC
    commutator motor with a planetary gear mechanism and an AC induction motor
    with an ordinary gear train are applied as examples. A feasible integrated DC
    commutator motor device is presented that reduces the cogging torque and the
    torque ripple by 92.02% and 50.14%, respectively, while increasing the torque
    density by 16.66%. The torque of the AC induction motor is reduced by 8.96%,
    and the torque ripple is reduced by 14.23%. In addition, the torque density is
    increased by 1.75%. This indicates that the integrated devices provide more
    stable and efficiency output torque than the existing design.
    顯示於類別:[機械與機電工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    On the Design of Integrated Electric Motors.pdf4997KbAdobe PDF127檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋