淡江大學機構典藏:Item 987654321/113452
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8501353      在线人数 : 7983
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/113452


    题名: Numerical and Experimental Verifications on the Wing Design of a Flapping Wing Micro Air Vehicle
    作者: Yang, Lung-Jieh
    关键词: Ornithopter;Flapping Wing;Micro Air Vehicle (MAV);Fluid-Structural Interaction (FSI)
    日期: 2018-02-22
    上传时间: 2018-05-22 12:11:16 (UTC+8)
    摘要: This talk is to demonstrate the numerical and experimental verifications on the modified wing design of a flapping wing micro air vehicles (FWMAVs). The subject is a flapping wing of 20 cm span used in micro ornithopters subject to the conditions of 13-15 Hz flapping, inclined body angle of 20 degrees and the upwind speed of 0-3 m/s. In the first part, numerical simulations will be performed through varying the density of mesh for half flapping wing profile with wind tunnel domain for varied flapping stroke angles 53° and 90°. Comparative evaluation of 3D numerical and experimental lift force data relevant to the translational and rotational lift phenomenon’s of Dickinson’s mechanisms will be revealed. The generation of stream line flows over the 3D wing profile will be also compared with existing smoke trace experimental data to check the agreement. The dynamic motion of a flapping wing using 3D stereo photography and COMSOL Multiphysics simulation will be moreover compared to realize the aerodynamic characteristics. The comparison of simulation and experimental results of 3D flapping wing is supposed to provide an insight to visualize the flapping wing motion characteristics and opens up new vista in flapping wing aerodynamic analysis of micro-air-vehicles (MAVs). A new flow visualization technique using soap film, developed by Tamkang University, is additionally demonstrated to evaluate the downwash and the 3D lift of a flapping wing. In the second part, FWMAV systems with conventional flapping mechanisms and all-servo flapping wing will be introduced respectively. The control for the FWMAV and the servos are basically Arduino-based modules which are good for light-weighted miniaturization in the future.
    關聯: Proceeding of IDAD 2018
    显示于类别:[機械與機電工程學系暨研究所] 會議論文

    文件中的档案:

    没有与此文件相关的档案.

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈