淡江大學機構典藏:Item 987654321/112903
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8367928      在线人数 : 7814
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/112903


    题名: Rapid prototyping of flapping mechanisms for monoplane and biplane ornithopter configurations
    作者: U. Chandrasekhar;L.-J. Yang, B. Esakki;S. Suryanarayanan;S. Salunkhe
    关键词: Ornithopters;Flapping Mechanisms;Rapid Prototyping;Thermoplastics;Photopolymer
    日期: 2017-06
    上传时间: 2018-03-09 12:10:47 (UTC+8)
    摘要: Application of rapid prototyping (RP) techniques such as stereolithography, fused deposition modelling and selective laser sintering in the development of complex engineering systems is on upsurge due to associated functional advantages such as time-compression, design-freedom and mass-customisation. This paper examines the feasibility of using various RP techniques for fabricating light-weight flapping wing mechanisms for subsequent use in bird-mimicking micro aerial vehicles called ornithopters. These mechanisms need to fulfil conflicting set of requirements related to compactness, low weight, high transmission efficiency and adequate structural integrity. In this work, the versatility of RP techniques is leveraged for fabricating transmission shaft, linkages and gearbox housing of dual crank mechanism that powers four-winged biplane ornithopters. The fabricated mechanisms are integrated into ornithopters and tested in customised rigs. Results on RP mechanisms are compared with those of conventionally manufactured mechanisms with focus on aerodynamic performance, strength and ease of assembly. Results indicate that RP mechanisms of biplane ornithopters that weigh about 4.50 gm can sustain the flight loads during take-off, climb and landing phases. Through integration of modern direct digital manufacturing techniques into design iteration and fabrication of flapping mechanisms, the reported work opens up new vistas in the development of new generation of ornithopters.
    關聯: International Journal of Modern Manufacturing Technologies 9(2), p.18-22
    显示于类别:[機械與機電工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML382检视/开启
    Rapid prototyping of flapping mechanisms for monoplane and biplane ornithopter configuration.pdf411KbAdobe PDF0检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈