淡江大學機構典藏:Item 987654321/112464
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3993889      線上人數 : 289
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/112464


    題名: The optimal design of the turbulence promoter in the desalination pretreatment system by using cross-flow microfiltration
    作者: Yu-Lin Luo;Kuo-Jen Hwang;Chii-Dong Ho;Kuo-Lun Tung;Hung-Yuan Tsai
    日期: 2017-11-17
    上傳時間: 2017-12-20 02:10:46 (UTC+8)
    摘要: Particles in seawater were removed using cross-flow microfiltration in the pretreatment of desalination procedure. Inorganic salts and SiO2 were mixed with pure water to prepare the artificial seawater in the present study. The zero concentration of SiO2 in the filtrate indicates that the filtration could completely block the SiO2 particles through the membrane. The turbulence promoter was implemented into the flow channel of the microfiltration device to increase the eddy of the flow stream, and thus particles accumulation on the membrane is considerably reduced. The effects cake properties on filtration fluxes were discussed with various operating conditions. There were three configurations of turbulence promoters were welded in the experimental works and the fluid velocity distribution was examined using FLUENT software. The filtration flux increases up to 80% as the transmembrane pressure increases from 20 kPa to 60 kPa of the cross-flow velocity 0.3 m/s while only 10% the filtration flux increment as the cross-flow velocity increases from 0.1 m/s to 0.5 m/s of the transmembrane pressure 20 kPa under the operations without welding the turbulence promoter. The filtration flux decreased by 24% with the turbulence promoter of type A due to the dead zone created at the front and rear of the turbulence promoter as the cross-flow velocity of 0.1 m/s. The dead zone was reduced to obtain a higher filtration efficiency as the cross-flow velocity increases. Moreover, the filtration fluxes increase 40~77%, 12~55% and 21~119% with welding turbulence promoters of type A, type B and type C, respectively, while the cake resistances decrease by 61.3%, 35.3% and 50.1% of type A, type B and type C, respectively.
    關聯: 台灣化學工程學會第64週年年會暨國科會化工學門成果發表
    顯示於類別:[化學工程與材料工程學系暨研究所] 會議論文

    文件中的檔案:

    沒有與此文件相關的檔案.

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋