淡江大學機構典藏:Item 987654321/111457
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 64178/96951 (66%)
Visitors : 9305771      Online Users : 242
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/111457


    Title: 4K2K超高畫質解析度多媒體訊號電磁波干擾防治與研究
    Other Titles: Study of electromagnetic interference of HDMI signal for 4K2K ultra resolution
    Authors: 董德安;DUNG, DE-AN
    Contributors: 淡江大學電機工程學系碩士在職專班
    劉寅春
    Keywords: 高清晰多媒體介面訊號;眼圖;去抖動晶片;HDMI;4K2K;EMI;Jitter cleaning
    Date: 2016
    Issue Date: 2017-08-24 23:53:19 (UTC+8)
    Abstract: 現今社會逐漸重視電磁波干擾的形成與對人體上的危害及影響等問題,本文主要研究現今影音通訊上廣泛使用的HDMI介面在超高解析度(Ultra –High- Definition 4K2K resolution)對於在EMI電磁波輻射干擾(Electromagnetic Interference,EMI)抑制之最佳成效。

    本論文使用標準的EMI實驗室與量測設備,透過實際量測與分析,進而了解HDMI介面在30MHZ ~ 1GHZ的數值是否符合國際法規的要求。目前市面上消費筆記型個人電腦(Note Book PC)的CPU標準輸出為HDMI1.4規格,因為要符合現今市面4K2K超高解析度的顯示器裝置,所以加入一顆Repeater晶片轉換成符合4K2K超高解析度的HDMI介面訊號。

    本文將針對印刷電路板上顯示晶片擺放距離、不同的雜訊抑制元件、訊號線路佈線設計等方法,藉由模擬及實際量測HDMI介面訊號在超高解析度時的電磁波輻射,實驗如何抑制其本身電磁波干擾但又不會衰減訊號完整度。並與標準認證實驗室量測出的測試結果做比較,尋求最佳化的設計。
    People are paying more and more attention on the radio radiation endangers human body. Interface of HDMI are now in widespread use for Ultra –High- Definition 4K2K resolution. As we know the higher speed or the higher resolution could make more noise. So our objective is hoping to find out the better EMI design for interface of HDMI for 4K2K resolution. In this research, we are using the qualified LAB, equipments and methods to do this analysis. By this research, we hope to find out the better design of interface of HDMI for 4K2K resolution and meet standard.

    Due to CPU output signal is HMDI 1.4 in Notebook PC nowadays. Vendors will use a PARADE PS-8407 repeater to transformer the
    HDMI signal to 4K2K signal. We will study a method how to not only reduce radio radiation but keep HDMI signal completely.

    Our measure or simulation method will depends on the chipset location on PCB, various common chokes, layout design of HDMI signal to get difference results. Then we could get the best design by compare these methods
    Appears in Collections:[Graduate Institute & Department of Electrical Engineering] Thesis

    Files in This Item:

    File Description SizeFormat
    index.html0KbHTML252View/Open

    All items in 機構典藏 are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - Feedback