淡江大學機構典藏:Item 987654321/110386
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62797/95867 (66%)
造訪人次 : 3731641      線上人數 : 660
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/110386


    題名: Design and Analysis of Bicycle Helmet with Impaxx Foam Liner
    作者: Teng, Tso-Liang;Liang, Cho-Chung;Shih, Chien-Jong;Nguyen, Van-Hai
    關鍵詞: Bicycle Helmet;EN1078 Standard;Impact Test;Impaxx Foams;Liner;LS-DYNA
    日期: 2013-05-18
    上傳時間: 2017-06-13 02:10:58 (UTC+8)
    摘要: Currently, expended polystyrene (EPS) are widely used as liner material in bicycle helmet. Due to its characteristics is excellent performance, lightweight, low cost of manufacturing. However, EPS has some disadvantage as difficulty to optimize energy absorbing in different areas of head and inferior effect of heat dissipation and a brittle characteristic. This study focuses on to find a replacement material for EPS foam to improve liner of bicycle helmet. Impaxx energy absorbing (EA) foams present strong potential in overcoming such problems of EPS foam. To make certain that all bicycle helmets reach efficiency, the helmets are required to pass shock absorption test of EN1078 standard. This study performs finite element analyses of helmet impact tests using LS-DYNA software. Simulation results indicate Impaxx foams are suitable for shock absorption test according to the EN1078 standard. Therefore these results encouraged the authors to extend the manufacturing work to cover the creating helmet design and performance experimental tests.
    關聯: Proceedings of MIM2013
    顯示於類別:[機械與機電工程學系暨研究所] 會議論文

    文件中的檔案:

    沒有與此文件相關的檔案.

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋