Design and Analysis of Bicycle Helmet with Impaxx Foam Liner

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 會議論文 > Item 987654321/110386

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/110386

题名:	Design and Analysis of Bicycle Helmet with Impaxx Foam Liner
作者:	Teng, Tso-Liang;Liang, Cho-Chung;Shih, Chien-Jong;Nguyen, Van-Hai
关键词:	Bicycle Helmet;EN1078 Standard;Impact Test;Impaxx Foams;Liner;LS-DYNA
日期:	2013-05-18
上传时间:	2017-06-13 02:10:58 (UTC+8)
摘要:	Currently, expended polystyrene (EPS) are widely used as liner material in bicycle helmet. Due to its characteristics is excellent performance, lightweight, low cost of manufacturing. However, EPS has some disadvantage as difficulty to optimize energy absorbing in different areas of head and inferior effect of heat dissipation and a brittle characteristic. This study focuses on to find a replacement material for EPS foam to improve liner of bicycle helmet. Impaxx energy absorbing (EA) foams present strong potential in overcoming such problems of EPS foam. To make certain that all bicycle helmets reach efficiency, the helmets are required to pass shock absorption test of EN1078 standard. This study performs finite element analyses of helmet impact tests using LS-DYNA software. Simulation results indicate Impaxx foams are suitable for shock absorption test according to the EN1078 standard. Therefore these results encouraged the authors to extend the manufacturing work to cover the creating helmet design and performance experimental tests.
關聯:	Proceedings of MIM2013
显示于类别:	[機械與機電工程學系暨研究所] 會議論文

文件中的档案:

没有与此文件相关的档案.

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章