Cavity Dependence of Core Penetration in Co-Injection Multi-Cavity Molding

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 會議論文 > Item 987654321/109932

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/109932

题名:	Cavity Dependence of Core Penetration in Co-Injection Multi-Cavity Molding
作者:	Huang, Chao-Tsai (C.T.);Hsu, Chih-Chung;Chang, Rong-Yeu;Tseng, Shi-Chang
关键词:	Multi-component molding;co-injection molding;core penetration;skin to core ratio
日期:	2016-07-26
上传时间:	2017-03-14 02:10:44 (UTC+8)
摘要:	Co-injection molding is commonly used in daily accessories, car parts, and structural-reinforcement product. However, there are too many combinations of designs, materials, core/skin ration, and process condition, how to have suitable control of co-injection is very challenge. Furthermore, co-injection with multi-cavity system which is commonly applied in some forks structure products. However, due to the complicated nature, the inside mechanism for the combination of co-injection and multi-cavity is still not fully understood yet. In this study, we have proposed three kinds of multi-cavity systems to investigate cavity design influence on the core material penetration behavior. In Model 1 with three separated cavity system, the core penetration into individual cavity is strongly dependent on the timing of complete filled of the first cavity. Although flow rate conditions will affect the penetration history during the processing, it doesn’t change the final core penetration shape too much. To realize how the flow rate effect is, we have applied slicing technology to discover the core penetration behavior and its history. Clearly, when the flow rate is increased, it is easier for the core material penetrated into thickness direction in the upstream period. It will push more skin material into downstream. It ends up a low core ratio into the cavities and has a more non-uniform skin/core distribution. On the other hand, we have also considered different thickness of connection between cavities in Model 2 (with 3.5 mm thick connector) and Model 3 (with 1.75 mm thick connector). During the early filling age (less than 90% of total volume filled), in Model 3, it is Branch 2 dominant; while in Model 2 it has no preference for Branch 1 and 2. The flow rate conditions have no significant effects for core penetration in this period. However, as more melt keeps flowing into cavities till the end of filling, the core penetration behavior is dramatically different at low flow rate (10 cm3/s). These results show that in the presence of different thickness of connector, the core penetration history and final shapes are significant different to that of separated cavity system (Model 1). Obviously, cavity design can alter the preference of core penetration from one side to the other. The results can help people for the management of skin/core distribution in co-injection molding.
關聯:	PPS-32 Proceeding
显示于类别:	[化學工程與材料工程學系暨研究所] 會議論文

文件中的档案:

档案	描述	大小	格式	浏览次数
Cavity Dependence of Core Penetration in Co-Injection Multi-Cavity Molding_議程.pdf		770Kb	Adobe PDF	82	检视/开启
index.html		0Kb	HTML	85	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....