Fiber Breakage History through a Barrier Structure Screw in Injection Molding

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 會議論文 > Item 987654321/109927

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/109927

題名:	Fiber Breakage History through a Barrier Structure Screw in Injection Molding
作者:	Huang, Chao-Tsai;Tseng, Huan-Chang;Chang, Rong-Yeu;Hwang, Sheng-Jye
關鍵詞:	fiber breakage;long fiber;injection molding
日期:	2016-09-23
上傳時間:	2017-03-14 02:10:37 (UTC+8)
摘要:	Recently, applying short and long fiber-reinforced thermoplastics (LFRT) to replace some metal components has become one of the most attractive lightweight technologies. However, the microstructures of fiber inside plastic matrix are too complicated to manage and control during the injection molding through the screw, the runner, the gate, and then into the cavity. On the other hand, the barrier type screw is very popular to enhance the plastification for better melt quality. But how the barrier design will influence the long fiber breakage is still not clear yet. In this study, we have integrated the screw plastification, to injection molding for fiber microstructures investigation. Specifically, we have focused on fiber breakage history through a barrier structure screw in injection molding. Results show that when 13 mm carbon fibers go through the barrier screw, the length of fibers is down to 1.75 mm (the number average) at the exit of screw. It is shorter than that when fibers go through the regular type screw system. Moreover, the fiber breakage phenomena for two types of fibers (glass fiber and carbon fiber) are also investigated. At the exit of the barrier screw, the number average of glass fibers is 2.21 mm. Clearly, the carbon fiber is easier to be broken. Furthermore, the carbon fiber length distribution has higher peak at the exit of the screw. This discovery is consistent with the experimental results of some current literature.
關聯:	PMI2016 Proceeding
顯示於類別:	[化學工程與材料工程學系暨研究所] 會議論文

文件中的檔案:

沒有與此文件相關的檔案.

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....