淡江大學機構典藏:Item 987654321/109064
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62805/95882 (66%)
造访人次 : 3938335      在线人数 : 906
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/109064


    题名: The Building Information Modeling and its Use for Data Transformation in the Structural Design Stage
    作者: Liu, Zhao-Qiu;Zhang, Fei;Zhang, Ji
    关键词: BIM Technology;IFC-format BIM Model;Structural Analysis Model;Data Transformation Interface;Information Integrating and Sharing
    日期: 2016-09
    上传时间: 2017-01-03 09:17:35 (UTC+8)
    出版者: 淡江大學出版中心
    摘要: As a processing technology of data and information, building information modeling (BIM) is
    often used for producing digital engineering model and promoting interoperability among participants
    involved in the Architecture, Engineering, and Construction (AEC) industry. The real values of BIM
    largely depend on effective information integrating and sharing among different stages or disciplines
    through the whole building lifecycle. To this day, although BIM has made a substantial contribution to
    the Chinese AEC industry, there are still some debates on its roles. Moreover, due to the complexity of
    structural design process, the weak link between structural model and BIM model makes its deep
    application even harder. To address these issues, this paper discusses the roles of BIM from the
    perspective of structural engineers through comparing with the traditional CAD. Then, the BIM
    structural model is studied by analyzing the model conformation, design mode, and Industry
    Foundation Classes (IFC)-format structural model. By comparing the differences between BIM
    physical model and structural mechanical model, an indirect method for the data transformation from
    BIM model to structural analysis model is proposed. An interface is developed based on the analysis of
    data formats and mapping rules. Three typical cases are adopted to demonstrate the data transfer
    efficiency by using the interface. The case study shows that the proposed method achieves higher
    efficiency for the data transformation from BIM model to structural analysis model.
    關聯: Journal of Applied Science and Engineering 19(3), pp.273-284
    DOI: 10.6180/jase.2016.19.3.05
    显示于类别:[淡江理工學刊] 第19卷第3期

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML582检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈