English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 51931/87076 (60%)
造訪人次 : 8476200      線上人數 : 146
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/108945

    題名: The Study of Rotational Ultrafiltration System for Recovery of Spent Cutting Oil from Solar Photovoltaic Cell Manufacturing Process
    作者: Shih, Chi-Yuan;GauSue-Huai;Kuo, Chi-Chang;Huang, Chang-Yun;Kuo, Sheng-Wei
    關鍵詞: Rotational Ultrafiltration;Diethylene Glycol;Recycle;Silicon Sawing;Cutting Oil
    日期: 2016-03
    上傳時間: 2016-12-20 09:43:55 (UTC+8)
    出版者: 淡江大學出版中心
    摘要: The main problems of recovery cutting oil from spent waste are high viscosity of cutting oil and
    high content of nano-size particle. This study combined an innovative rotational circular-plate
    ultrafiltration membrane filter with a scraping device to recycle the cutting oil and remove particles
    fouling cake attached to the membrane surface, and was able to maintain cutting oil filtrate flux above
    6.65 l/m2
    /hr. Also, the proposed process is the practical solution for materials separation between
    highly viscosity liquid and fine particles even nano-size. The results show the filtrate of ultrafiltration
    membrane could meet the reuse requirements of less than 0.03% solid content. Analysis of blended oil
    characteristics under different blending ratios was conducted, showing the optimum blending ratio of
    recycled oil to new cutting oil was 6:4. The final production cost can be reduced over 27.4%. The
    process can achieve waste reuse ratio of greater than 77.2%.
    關聯: Journal of Applied Science and Engineering 19(1), pp.75-82
    DOI: 10.6180/jase.2016.19.1.09
    顯示於類別:[淡江理工學刊] 第19卷第1期


    檔案 大小格式瀏覽次數



    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋