淡江大學機構典藏:Item 987654321/108647
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 61683/94630 (65%)
造訪人次 : 1631996      線上人數 : 17
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/108647


    題名: “Advanced CAE technology for Microcellular Injection Molding”
    作者: Chaa-Tsai Huang;Rong-Yue Chang
    關鍵詞: microcellular injection molding;CAE;supercritical fluids
    日期: 2016-10-26
    上傳時間: 2016-11-30 02:14:02 (UTC+8)
    出版者: CRC Press (Taylor Francis Group)
    摘要: Microcellular technology has been enormously developing and applied in many foaming processes for many industrial polymers manufacturing, since the microcellular batch processing technology has brought out by Dr. Nam Suh and co-workers at MIT in the early 1980s [1]. The microcellular application used in reciprocating screw injection molding machine was built by Trexel and Engel in 1998 [2]. Despite the microcellular technology has been developing for many decades and widely used in today’s plastic product manufacturing, the reliable computer aided engineering application is not well developed due to limited understanding of complex foaming mechanism. Venerus [3] reviewed numerous diffusion-controlled modeling studies of polymer foaming and showed the diffusion-induced bubble growth in viscoelastic liquids numerically having good agreement with experimental data. Taki [4] studied the effects of pressure release rate on bubble density and sizes. Recently, the previous developed models of cell foaming have been couple with 3D flow motion technology for microcellular injection molding. However, the dynamic features of bubble growth and the integration from bubble growth mechanism to the final injected parts are not fully developed. In this chapter, we are going to describe about the numerical development in microcellular injection molding. Furthermore, the dynamic features of bubble growth, including bubble size and bubble density are validated with the experimental data done by Turng and co-workers [5]. Moreover, this advanced CAE technology is applied in some case to realize how and why microcellular process can benefit in details.
    關聯: Polymeric Foams; Innovations in Processes, Technologies, and Products, Page345-360
    顯示於類別:[化學工程與材料工程學系暨研究所] 專書之單篇

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML161檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋