Experimental studies on 3D printed parts for rapid prototyping of micro aerial vehicles

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/108185

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/108185

题名:	Experimental studies on 3D printed parts for rapid prototyping of micro aerial vehicles
作者:	Udayagiri, Chandrasekhar;Kulkarni, Milind;Esakki, Balasubramanian;Pakiriswamy, Sarasu;Yang, Lung-Jieh
关键词:	Stereolithography;Fused Deposition Modeling;Electro Deposition;MAV
日期:	2016-03
上传时间:	2016-11-05 02:11:09 (UTC+8)
出版者:	Tamkang University
摘要:	This paper presents the results of exploratory studies for facilitating the direct use of 3D printed parts in design and development of micro aerial vehicles (MAV). 3D printing processes of stereolithography and fused deposition modeling are investigated as the candidate prototyping options. Custom developed electro-chemical and mechanical processes are used to deposit thin structural nickel coatings on 3D printed test specimens and MAV parts. Residual stress and mechanical strength of coated 3D printed specimens are evaluated through experimental methods. Considerable improvement is realized in tensile and impact performance of the coated 3D printed parts. Findings from this study enable the MAV research teams to work with multiple design options and arrive at optimal solutions without severe time and cost penalties that are typically associated with conventional manufacturing procedures.
關聯:	淡江理工學刊 19(1), p.17-22
DOI:	10.6180/jase.2016.19.1.03
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
Experimental studies on 3D printed parts for rapid prototyping of micro aerial vehicles.pdf		1100Kb	Adobe PDF	1	检视/开启
index.html		0Kb	HTML	106	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章