淡江大學機構典藏:Item 987654321/107049
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62797/95867 (66%)
造访人次 : 3739038      在线人数 : 335
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/107049


    题名: Cavity Effect on Core Penetration in Co-Injection Multi-Cavity Molding
    作者: Chao-Tsai (CT) Huang;Chih-Chung Hsu;Rong-Yeu Chang;Shi-Chang Tseng
    关键词: co-injection;multi-cavity;core penetration
    日期: 2016-05-24
    上传时间: 2016-08-15
    摘要: Co-injection molding is commonly used in daily accessories, car parts, and structural-reinforcement product. However, there are too many combinations of designs, materials, core/skin ration, and process condition, how to have suitable control of co-injection is very challenge. Furthermore, co-injection with multi-cavity system is also utilized in some forks structure products. Due to the complicated nature, the inside mechanism of the multi-cavity co-injection system is still not fully understood yet. In this study, we have proposed three kinds of multi-cavity systems to investigate cavity design influence on the core material penetration behavior. In Model 1, it is a three separated cavities system. Although the flow rate can influence core penetration during early history through the runners, the separated cavity structure will restrict the core development in Cavity 1. Then it ends up with a non-uniform skin/core distribution in presence of different flow rates influence. Moreover, when it has a different thickness of connection between cavities in Model 2 (with 3.5 mm thick connector) and Model 3 (with 1.75 mm thick connector), during the early filling age (less than 90% of total volume filled), it is Branch 2 dominant in Model 3; while in Model 2 it has no preference for Branch 1 and 2. The flow rate conditions have no significant effects for core penetration in this period. However, as more melt keeps flowing into cavities till the end of filling, the core penetration behavior is dramatically different at low flow rate (say 10 cm3/s). These results show that in the presence of different thickness of connector, the penetration history and final shapes of core layer are significant different to that of separated cavity system (Model 1). Obviously, cavity design can alter the preference of core penetration from one side to the other. The results can help people for the management of skin/core distribution in co-injection molding.
    關聯: SPE ANTEC Indianapolis, p.1040-1044
    显示于类别:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML126检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈