Investigation of Fiber Breakage Phenomena for Different Fiber Types in Injection Molding

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/107047

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/107047

题名:	Investigation of Fiber Breakage Phenomena for Different Fiber Types in Injection Molding
作者:	Chao-Tsai (CT) Huang;Huan-Chang Tseng;Rong-Yeu Chang;Sheng-Jye Hwang
关键词:	fiber breakage;long fiber;injection molsing
日期:	2016-05-26
上传时间:	2016-08-15
摘要:	The lightweight technologies become the driving force for people in automotives and other developments in recent years. Among those technologies, using short and long fiber-reinforced thermoplastics (FRT) to replace some metal components can reduce the weight of an automotive significantly. However, the microstructures of fiber inside plastic matrix are too complicated to manage and control during the injection molding through the screw, the runner, the gate, and then into the cavity. In this study, we have integrated the screw plastification, to injection molding for fiber microstructures investigation. Specifically, we have paid our attention on fiber breakage prediction during screw plastification. Results show that fiber breakage is strongly dependent on screw design and operation. When the screw geometry changes, the fiber breakage can be higher even if the compression ratio is lower. Moreover, the fiber breakage phenomena for two types of fibers (glass fiber and carbon fiber) are also investigated. It shows that carbon fiber is easier to be broken. Also the carbon fiber length distribution has higher peak at the exit of the screw.
關聯:	SPE ANTEC Indianapolis, p.1120-1125
DOI:	無
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

档案	大小	格式	浏览次数
index.html	0Kb	HTML	145	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....