Direct measurement of the contact normal stress distribution between two smooth joint surfaces

淡江大學機構典藏 > 工學院 > 土木工程學系暨研究所 > 會議論文 > Item 987654321/106569

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/106569

題名:	Direct measurement of the contact normal stress distribution between two smooth joint surfaces
作者:	Yang, Z.Y.;Chiu, W.C.
關鍵詞:	Contact Stress;Joint Surface;Normal Stress;Pressure Measurement Film
日期:	2014-06-30
上傳時間:	2016-04-27 11:17:18 (UTC+8)
摘要:	The shear strength of rock joints is highly depended upon the failure mode of joint asperity. At lower normal stress slide-up of one asperity up over another mode, however at high normal stress the joint asperities are sheared off at the base. This research uses pressure measurement film to directly measure the contact normal stress between smooth joint surfaces. It demonstrates that the density of color impression is capable of capturing the normal stress distribution behavior. The contact normal stress distribution during shearing is changed. After shearing, the contact stress becomes large. This increase in contact normal stress is to fracture the joint wall material.
關聯:	Applied Mechanics and Materials 638-640, pp.427-432
DOI:	10.4028/www.scientific.net/AMM.638-640.427
顯示於類別:	[土木工程學系暨研究所] 會議論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	230	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章