Dynamic penetration behavior of core-material in multi-cavity co-injection molding

doi:10.1063/1.4937280

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/106336

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/106336

题名:	Dynamic penetration behavior of core-material in multi-cavity co-injection molding
作者:	Huang, Chao-Tsai;Yang, Jackie Yang;Chang, Rong-Yeu
关键词:	co-injection;multi-cavity;core penetration
日期:	2015-12-17
上传时间:	2016-04-22 13:46:33 (UTC+8)
出版者:	AIP Publishing
摘要:	Co-Injection Molding and multi-cavity molding are very common processes for plastic manufacturing. These two systems are sometimes combined and applied to some structure products. The core penetration and flow balance control problems are very difficult to manage. The inside mechanism of co-injection multi-cavity system is not fully figured out yet. In this study, we have focused on the penetration phenomena of core-material in a co-injection multicavity molding. The dynamic penetration behavior of core is very sensitive to injection flow rate and skin/core ratio. The longest core penetration has been shown to change dramatically from one runner to the other. In addition, the core penetration behavior will display imbalance at the end of filling. The more core ratio it is, the longer core penetration flows through runner to cavity. However, due to the multi-cavity geometrical structure, the balance of the core penetration for multi-cavity is still challenging. Finally, the simulation is validated with some literature. The results showed that both simulation and experiment are in a good agreement in trend.
關聯:	AIP Conference Proceedings 1695(1), 020002(8 pages)
DOI:	10.1063/1.4937280
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
Dynamic penetration behavior of core-material in multi-cavity co-injection molding_黃招財.pdf		1683Kb	Adobe PDF	489	检视/开启
index.html		0Kb	HTML	156	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....