Manufacturing and tribological properties of copper matrix/carbon nanotubes composites

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/106085

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/106085

題名:	Manufacturing and tribological properties of copper matrix/carbon nanotubes composites
作者:	Lina, C.B.;Chang, Zue-Chin;Tung, Y.H.;Ko, Yuan-Yuan
關鍵詞:	Copper matrix/carbon nanotubes composite;Electroless-plating copper;Tribology;Friction coefficient;Wear rate
日期:	2011-02-10
上傳時間:	2016-04-22 13:19:19 (UTC+8)
出版者:	ELSEVIER
摘要:	The dry wear tests were introduced to investigate the tribology properties varying with the contents of carbon nanotubes, the sliding velocity and the normal loadings on martensitic S45C carbon steels and the copper matrix composites with 5, 10, 15 and 20 vol.% carbon nanotubes, which are fabricated by the vacuum sintering method. The friction coefficient increases as the content of carbon nanotubes decreases and the wear rate shows the lowest value when the carbon nanotubes content is 10–15 vol.%. The rise of stick-slip effect results in that the friction coefficient and the contact resistance increased with the increasing of sliding velocity. Because of the effect in decreasing the stick-slip phenomenon and in increasing the plow and seizing wear, the tribology properties do not change apparently with the increasing of loads. In summary, when PV value is 1.802, the wear rate is the highest.
關聯:	Wear 270(5-6), pp.382-394
DOI:	10.1016/j.wear.2010.11.010
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
1-s2.0-S0043164810004242-main.pdf		2903Kb	Adobe PDF	1	檢視/開啟
index.html		0Kb	HTML	167	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章