淡江大學機構典藏:Item 987654321/105769
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62805/95882 (66%)
造访人次 : 3906576      在线人数 : 577
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/105769


    题名: Development of on-board avionics for a 15-gram flapping MAV
    其它题名: 15克重微飛行器之機載航電元件開發
    作者: 蘇希德;Marimuthu, Suseendar
    贡献者: 淡江大學機械與機電工程學系碩士班
    楊龍杰;Yang, Lung Jieh
    关键词: 拍翼機;方向控制;高度控制;輕量化電路板;flapping micro-air-vehicle (MAV);Avionics;Autonomous Control;flapping wing control
    日期: 2015
    上传时间: 2016-01-22 15:04:48 (UTC+8)
    摘要: 論文提要內容：
    文章中提到了一款新的可重複編寫，並且可搭載在拍翼機上的控制晶片。一開始文章中先分別介紹晶片中所使用的ATmeg328P微型處理器、慣性量測系統和高度感測器，在這章節也會剖析並詳細介紹這些感測器的選擇和如何使用這些感測數據，並應用在實際的飛行上面。
    這次主要飛行任務，是讓拍翼機具備自主方向控制，可以依照設定在不同起飛位置都能飛往設定的方向。
    下面文章將介紹M1AP，也就是新設計的控制晶片，M1AP是一個多功能可編寫並且可連接Arduino平台的晶片，晶片重量僅有0.75克重，並且包含了有12C的數位輸入和輸出、模擬輸入和輸出，還有SPI接口。最後將介紹整個M1AP的操作流程和使用方法。
    Abstract：
    This thesis presents the full development cycle of a programmable, lightweight control architecture capable of autonomously guiding a 15 gram flapping MAV by using onboard sensing and computational resources. In the earlier phase of the work, the prototyping of the control board housing an ATmega328P microcontroller, interfaced with Inertial Measurement Unit (IMU) and a pressure sensor is described. These chapters also dissect and examine in detail the choice of sensors, the practical usage of sensor data and control methods to actuate the MAV. The prototype board is used for a proof-of-concept flight test where the flapping wing MAV is autonomously guided towards a preprogrammed direction.
    The following chapters describe the design and development of the integrated control chip named “M1AP” housing all the components that are required. The M1AP is a fully functional and programmable chip compatible with Arduino platform, weighing 0.75 grams in weight. It includes interfaces for I2C, digital input and output, Analog input and output and also SPI programming. The standard operating procedure for uploading the firmware to M1AP is described and consequently, the direction seeking program performed during prototype stage is repeated with the new chip and the results are discussed.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML241检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈