淡江大學機構典藏:Item 987654321/105757
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62830/95882 (66%)
造访人次 : 4036005      在线人数 : 823
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/105757


    题名: 多步相位移干涉術應用於三維複雜曲面量測
    其它题名: The application of multi-step phase-shift interferometry for three-dimensional complex surface measurement
    作者: 顏子評;Yen, Tzu-Ping
    贡献者: 淡江大學機械與機電工程學系碩士班
    劉承揚;Liu, Cheng-Yang
    关键词: 三維曲面量測;結構光;相位移技術;參考平面扣除法;滾珠螺桿;three-dimensional surface measurement;structured light;phase-shift technique;reference plane subtraction method;ballscrew
    日期: 2015
    上传时间: 2016-01-22 15:04:30 (UTC+8)
    摘要: 本論文研究結合數位結構光投影、多步相位移、相位展開與參考平面扣除法等技術來量測滾珠螺桿之三維曲面，其中結構光為黑白餘弦條紋，相位移技術採用三、四、五及七步相位移法，相位展開技術採用路徑獨立型相位展開技術，並改良參考平面扣除法，成功減少參考平面扣除時產生的相位誤差。在實驗系統方面，本論文使用DLP投影機作為結構光光源，CCD攝影機為接收裝置，並透過電控轉盤來控制攝影機的角度，精確的進行不同角度之量測，以觀察在不同量測角度和多步相位移干涉下對螺桿三維曲面量測的影響。實驗結果證明，七步相位移干涉的量測結果最佳，其相位誤差最小，而量測角度以20°為最佳，當量測角度越大時，則相位損失越嚴重。本論文建立出一套完整的多步相位移干涉量測系統，系統架構簡單，操作容易，量測精度可達0.05 mm，未來可應用於生產線上之即時三維曲面量測。
    The Three-dimensional surface measurements of ballscrew are presented in this thesis, including digital structured light projection, multi-step phase-shifting, phase unwrapping and reference plane subtraction method. The light source used in the system is structured light with black and white cosine fringe pattern. The three-step, four-step, five-step and seven-step phase shifting techniques are used to calculate wrapped phase maps. The phase unwrapping technique is used to obtain the absolute unwrapping phase maps. The phase errors are reduced by using reference plane subtraction. In the experimental system, a DLP projector is used as light source to project structured light onto ballscrew surface. The fringe pattern images are captured by the CCD camera. The detecting angle of the camera is controlled by using motorized stage. The influence of the detecting angles and multi-step phase-shifting technique are observed and analyzed. The experimental results prove that the seven-step phase-shifting technique has best imaging with lowest phase error. The best detecting angle is twenty degree. The phase errors increase as detecting angle increase. The multi-step phase-shifting interferometry measurement system is simple and easy to operate and can be used for real time three-dimensional surface measurement.
    显示于类别:[機械與機電工程學系暨研究所] 學位論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML166检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈