外包與層狀加勁礫石樁軸向載重行為之數值分析比較

淡江大學機構典藏 > 工學院 > 土木工程學系暨研究所 > 學位論文 > Item 987654321/105630

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/105630

题名:	外包與層狀加勁礫石樁軸向載重行為之數值分析比較
其它题名:	Comparative study on axial stress of encased and laminated granular columns using numerical analysis
作者:	林冠廷;Lin, Guan-Ting
贡献者:	淡江大學土木工程學系碩士班洪勇善
关键词:	地工合成材;層狀加勁;外包加勁;數值模擬;砂樁;geosynthetic;Laminated reinforced;Encased reinforced;numerical modeling;sand column
日期:	2015
上传时间:	2016-01-22 15:01:02 (UTC+8)
摘要:	本研究使用數值分析方式，模擬試驗砂土及加勁材之力學行為。以軸對稱方式，建立加勁砂柱之數值模型，並利用程式FLAC進行分析，分別模擬實驗室之外包及層狀加勁砂柱之力學行為。確立模式正確性後，依現地砂樁尺寸與加勁材料，分析此兩種加勁方式在相同加勁材用量時，軸向承載行為之差異與加勁效能。分析結果獲得無論是外包或層狀加勁，當樁徑愈小或加勁材勁度愈大，加勁材所提供之圍束應力愈大，柱體可承受之軸向壓力也愈大，對柱體腫脹之抑制效果愈佳。一般加勁材勁度的情況下(100-1000 kPa)，層狀加勁所提供的軸向承載壓力優於外包形式；但若採用極高勁度加勁材(5000 kPa)，且於較大的軸應變下，則外包加勁形式可提供較大的軸向壓力。此外，層狀加勁之加勁材與砂土間的界面摩擦角，也將明顯影響加勁礫石樁的軸向承載壓力。 The purpose of this study is to compare the mechanical behavior of encased and laminated granular columns using a numerical method. The numerical analysis is performed using the finite difference program FLAC. An axial symmetrical model is used based on elastic-plastic constitutive model with non-associated flow rule. Numerical analysis results are verified via laboratory triaxial tests on encased/laminated sand columns. The reinforcement stiffness, strength and diameter of the granular column in the field influence reinforced columns response is also studied. Based on the same amount of reinforcement, the axial bearing capacity is compared for the both reinforced types. Parametric studies on the column diameter, an increase in the reinforcement stiffness or a decrease in the column diameter might obtain greater axial bearing pressure and inhibit column bulging due to increase of confining pressure in the soil mass for the both of type reinforced columns. The bearing capability for a laminated reinforced column is greater than an encased column as same amount of reinforcement under general reinforcement stiffness (100-1000 kPa). However, the encased column might cause higher capability as using the high-stiffness (5000 kPa) reinforcement under larger axial strain. The interfacial friction angle may cause slippage to occur early for laminated reinforced columns. Therefore, a reinforced column with lower interfacial friction angle achieves lower strength.
显示于类别:	[土木工程學系暨研究所] 學位論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	138	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....