淡江大學機構典藏:Item 987654321/105628
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64185/96962 (66%)
造訪人次 : 12748339      線上人數 : 9477
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/105628


    題名: 軟弱粘土層中水平層狀加勁砂樁承載試驗
    其他題名: Model tests on bearing behavior of horizontal laminated reinforced sand columns in soft clay
    作者: 陳冠龍;Chen, Guan-Long
    貢獻者: 淡江大學土木工程學系碩士班
    洪勇善;Hong, Yung-Shan
    關鍵詞: 砂樁;軟弱粘土;地工合成材;層狀加勁;模型試驗;sand column;Soft clay;geosynthetic;Laminated reinforced;Model test
    日期: 2015
    上傳時間: 2016-01-22 15:00:59 (UTC+8)
    摘要: 本研究針對軟弱粘土中層狀加勁砂樁的應用進行模型試驗,為使試驗符合現地真實行為,依模型相似律之因次分析,選擇適當的材料與尺寸進行試驗。試驗針對三種不同強度之加勁材料,分五層、十層與同向及交叉擺設以及不同加勁範圍之層數配置進行模型試驗。此外,也進行純粘土及未加勁砂樁的試驗,比較純粘土所提供的承載能力與未加勁以及不同加勁材強度、層數等承載能力的變化。

    試驗結果顯示,當軟弱粘土層中之砂樁水平置入加勁材後,能有效提升軸向承載壓力,並將上方載重傳遞至砂樁底部。當擺設之加勁材強度大時,較密的加勁材間距可大幅提升砂樁之承壓能力。若加勁材具有較大之強度異向性,交叉擺設較同向擺設能帶來較好的效果。而不同加勁範圍方面,由試驗得知部分加勁無法達到與全段加勁相近之軸壓能力。擺設加勁材後,能束制砂樁側向腫脹程度,擺設間距較密且強度較大之加勁材,更能有效束制側向腫脹並使樁體變形更趨均勻。
    This study investigates the bearing behavior of individual geosynthetic-laminated sand columns embedded in very soft clay through model tests. Similarity analysis was first executed to determine the suitable properties of the constituents used in the model test to ensure comparable behavior between the prototype-scale and model-scale geosynthetic-laminated sand columns. The model tests were conducted on three types of geosynthetics was employed to reinforce the sand columns either with 5 or 10 layers in same and cross direction of geosynthetic sheets horizontally placed in these model sand columns. Loading tests performed on soft clay, ordinary sand column (OSC) and laminated reinforced sand column (LRSC) were employed to explore the effectiveness of reinforcement and various horizontal spacing.

    Experimental results showed that horizontally inserted reinforcements improve the bearing capability of the model sand columns. Using the reinforcements with high strength and smaller spacing can exhibit significant improvement in bearing capacity of sand column. Consequently, the greater amounts of stress are transmitted from the top to the bottom of the laminated reinforced sand columns, and the columns deform in a relatively uniform manner along the height of the columns. If the reinforcement has obvious anisotropic behavior on strength, then place it in cross can provide higher bearing capability. Additionally, local reinforced area in sand columns cannot obtain the close bearing capability.
    顯示於類別:[土木工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML239檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋