淡江大學機構典藏:Item 987654321/102669
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62822/95882 (66%)
造访人次 : 4012673      在线人数 : 940
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/102669


    题名: 載波聚合天線設計與模擬
    其它题名: Design and simulation of carrier aggregate antenna system
    作者: 黃梓城;Huang, Tzu-Cheng
    贡献者: 淡江大學電機工程學系碩士班
    詹益光;Jan, Yih-Guang
    关键词: 載波聚合技術;長期演進技術;3D列印技術;系統優化;天線設計;Carrier Aggregation;Long Term Evolution;3D printing technology;System Optimization;Antenna Design
    日期: 2014
    上传时间: 2015-05-04 10:01:30 (UTC+8)
    摘要: 本篇論文主要研究長期演進技術(Long Term Evolution, LTE)中的載波聚合技術(Carrier Aggregation, CA)，應用於3D印表機所印出的塑膠模板， 載波聚合技術是將多個載波同時使用，故我們會在載波聚合所使用的頻段選取其中幾個作為我們設計的目標頻段，先將選取頻率經過長度計算放置在平板上做模擬，再將模擬好的天線在放入載波聚合的模具上，會產生頻寬不足以及頻率飄移等問題，藉由我們在平面天線優化上的經驗，分別以加寬導線的寬度及調整導線長度來做修正，調整好的天線在多天線上還存在著隔離度的問題，我們分別以不同角度的隔離度來做模擬，得到90度以上的角度隔離度較佳，再加上考慮到天線個數上的問題，以90度為我們的最佳擺放位置。
    Carrier aggregation, one of the novel technologies considered in the Long Term Evolution (LTE) system, is the technology to aggregate many component carriers together and have the user to transmit the data over the aggregated frequency bands to increase the user’s transmission rate. The frequencies of the frequency bands selected in the carrier aggregation are considered as the target bands. The design and the fabrication of antennas having frequencies associated with the target bands by utilizing 3D printer’s printing technology are considered in this thesis. In the design of carrier frequency aggregated antennas the required lengths of the target bands are first calculated; various shapes of strip lines with the calculated lengths are then fabricated with proper materials and line sizes. The simulated and fabricated antennas are then placed on the carrier frequency aggregated templates to have antenna characteristics such as the antenna bandwidths, target bands center frequencies and transmission characteristics such as s11, s12, s21, s22 are simulated and measured. Through optimization techniques to achieve best antennas characteristics the best combinations of lengths and widths of the strip lines are obtained through running the derived optimization algorithm after satisfactory number of iterations. Various lines placing angles are also considered and simulated to solve the possible isolation problems among the printed carrier aggregated antennas. From simulations the antennas will have the best isolation if their placing angles are more than 90 degrees. 90 degrees line placing angles are selected in the final antennas fabrication to simplify the process of line placing and its fabrication.
    显示于类别:[電機工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML178检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈