淡江大學機構典藏:Item 987654321/100935
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3945705      線上人數 : 568
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/100935


    題名: Development of a Distributed Multi-MCU Based Flight Control System for Unmanned Aerial Vehicle
    作者: 蕭照焜;洪為勝
    貢獻者: 淡江大學航空太空工程學系
    關鍵詞: distributed control system;delay compensation;UAV
    日期: 2014-11
    上傳時間: 2015-03-18 10:28:58 (UTC+8)
    摘要: This paper investigates the design and implementation of a distributed multi-microcontroller based control system development environment. A DSPIC microcontroller (MCU) based system architecture is established first. The system contains three major parts, namely, sensing and attitude determination section, control section, and ground section. The sensing and attitude determination section consists of four circuit boards (master control board, slave control board, sensor board, and power supply board) with identical size ( ). The sensor boards contains three axes inertial measurement unit (include gyro, accelerometer, and electronic compass) and a GPS receiver. The sensors and the DSPIC MCUs are connected over an I2C (inter-integrated circuit) data bus with the DSPIC on the master control board as the master MCU. Unscented Kalman filter based attitude estimation is incorporated in this embedded system. With incorporation of modular design, combination of the master control board and the slave control board will form the control section of the system. Communications between sections are achieved through UART interface. Because of modular design, the system can be easily expanded to integrate other avionics functions. A model-based state feedback flight control system with time delay is also presented to deal with the inevitable time delay problem of the network control system. The plant model is used to simulate the plant behavior during the periods when sensor data are not available. When the controller receives the sensor data that were transmitted by the sensor a period of time ago, a propagation unit is employed in the control system to propagate the sensor signals instantaneously to the present time. The estimate is then used to update the model that in turn will generate the control signal for the UAV. Computer simulation confirms the success of the model-based design for the distributed multi-chips flight control system.
    顯示於類別:[航空太空工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    Development of a Distributed Multi-MCU Based Flight.pdf全文2637KbAdobe PDF183檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋