Study on Extending Tool Life of Micro WC Drills by Various Protective Coatings

doi:10.4028/www.scientific.net/AMM.217-219.2121

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/100518

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/100518

題名:	Study on Extending Tool Life of Micro WC Drills by Various Protective Coatings
作者:	Chao, Choung-Lii;Lin, Wen-Chung;Chou, Wen-Chen;Chen, Ying-Tung;Ma, Kung-Jeng;Chao, Chung-Woei
貢獻者:	淡江大學機械與機電工程學系
關鍵詞:	Micro-Drill;Surface Coating;Tool Life;Unbalanced Magnetron Sputtering
日期:	2012-01-01
上傳時間:	2015-03-03 01:54:46 (UTC+8)
出版者:	Pfaffikon: Scientific.Net
摘要:	As the trend of electronic industry is fast moving towards miniaturization, diversity, high efficiency and high throughput, the devices to be mounted onto a PCB are increasingly densely packed so are the holes needed to keep all elements in place. To effectively and economically generate so many holes of small diameter and high aspect ratio, the drilling process has to be done in a high speed manner and tool life has to be kept as long as possible. This study aimed to improve the tool life and the quality of the obtained holes by applying various hard coatings on the drills. The results showed that tool life could be effectively improved from 2500 hits to around 11000 hits at 155Krpm and 3.5m/min when proper hard coating was applied. It was found that wear of drill was resulted mainly from abrasive wear and adhesion wear. It was also showed in the research that while non-coated drills suffered serious deformation after 500 hits those coated with Al2O3 could finish 11000 hits with very limited wear land on the drills.
關聯:	Applied Mechanics and Materials 217-219, pp.2121-2124
DOI:	10.4028/www.scientific.net/AMM.217-219.2121
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	343	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....