Precision grinding of tungsten carbide mold insert for molding of sub-millimeter glass aspheric lenses

doi:10.1117/12.2021120

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/100516

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/100516

题名:	Precision grinding of tungsten carbide mold insert for molding of sub-millimeter glass aspheric lenses
作者:	Chao, Choung-Lii;Chang, Chia-Jung;Chen, Chun-Chieh;Chou, Wen-Chen;Ma, Kung-Jeng
贡献者:	淡江大學機械與機電工程學系
日期:	2013-04-01
上传时间:	2015-03-03 01:48:12 (UTC+8)
出版者:	SPIE
摘要:	As the demand for precision optical components with sub-millimeter feature size steadily increasing, numerous efforts have been made in developing new techniques and in improving the existing approaches to efficiently and economically produce those components. Glass molding process (GMP) is one of these methods to enable mass production of precision glass optical components in recent years. One of the key issues in GMP is precision mold insert fabrication. Since the mould are normally made of hard and brittle materials such as tungsten carbide (WC) and silicon carbide (SiC), precision diamond grinding is by far the principal choice used to machine the GMP mould. As the feature size of optical component gets smaller, the size of mould and grinding wheel used to fabricate the mould gets smaller too. This makes the grinding process a very time consuming and expensive task. This research aimed to improve the small mold fabrication processes by developing an effective way of producing small diamond wheels and in-process monitoring wheel profile. Diamond wheels of around 0.2mm to 0.5mm in diameter after truing and WC aspheric mold insert of form accuracy around 0.47μm were successfully produced in this research.
關聯:	Proc. SPIE 8769
DOI:	10.1117/12.2021120
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	287	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....