Modeling and Manufacturing of a Micromachined Magnetic Sensor Using the CMOS Process without Any Post-Process

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/100110

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/100110

题名:	Modeling and Manufacturing of a Micromachined Magnetic Sensor Using the CMOS Process without Any Post-Process
作者:	Tseng, Jian-Zhi;Wu, Chyan-Chyi;Dai, Ching-Liang
贡献者:	淡江大學機械與機電工程學系
关键词:	magnetic sensor;magneto-transistor;CMOS
日期:	2014-04-11
上传时间:	2015-01-28 11:07:45 (UTC+8)
出版者:	Switzerland: M D P I AG
摘要:	The modeling and fabrication of a magnetic microsensor based on a magneto-transistor were presented. The magnetic sensor is fabricated by the commercial 0.18 μm complementary metal oxide semiconductor (CMOS) process without any post-process. The finite element method (FEM) software Sentaurus TCAD is utilized to analyze the electrical properties and carriers motion path of the magneto-transistor. A readout circuit is used to amplify the voltage difference of the bases into the output voltage. Experiments show that the sensitivity of the magnetic sensor is 354 mV/T at the supply current of 4 mA.
關聯:	Sensors 14(4), pp.6722-6733
DOI:	10.3390/s140406722
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	217	检视/开启
Modeling and Manufacturing of a Micromachined Magnetic Sensor Using the CMOS Process without Any Post-Process.pdf		722Kb	Adobe PDF	26	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章