淡江大學機構典藏:Item 987654321/100024
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4046660      線上人數 : 817
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/100024


    題名: An Analysis of Forming Limit for Various Arc Radii of Punch in Micro Deep Drawing of the Square Cup
    作者: Yeh, F.-H.;Li, C.-L.;Tsay, K.-N.
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: Explicit Dynamic Finite Element Method;Forming Limit;Forming Limit Diagram (FLD);Limit Drawing Ratio;Micro Deep Drawing;Square Cup
    日期: 2012-01
    上傳時間: 2015-01-22 11:23:46 (UTC+8)
    出版者: Pfaffikon: Scientific.Net
    摘要: This paper presents an explicit dynamic finite element method (FEM) in conjunction with the forming limit diagram (FLD) to analyze the forming limit for the various arc radii of punch in micro deep drawing of square cup. In the present study, the tensile test and friction test are performed to obtain the material parameters of the electro-deposited copper foil according to the ASTM standards. Importing these properties, the numerical analysis is conducted by the explicit dynamic FEM. The FLD in numerical simulation is used as the criterion of the forming limit in micro deep drawing of the square cup. The forming limit, deformed shape, punch load-stroke relationship, height of cup and thickness distribution of square cup, are discussed and compared with the experimental results. It shows that a good agreement is achieved from comparison between simulated and experimental results. When the arc radii of punch increase with Rp=0.2, 0.5 and 0.8mm, the limit drawing ratio increases from 1.90 to 2.03 and 2.10. The forming limit of square cup increases with an increase of the arc radii of punch. From this investigation, the results of this paper can be used as reference in the relative researches and applications of micro forming.
    關聯: Advanced Materials Research 433-440, p.660-665
    DOI: 10.4028/www.scientific.net/AMR.433-440.660
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML311檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋